21
•
Ensure that your mains power corresponds with the specifications of the appliance. The specifica-
tions are printed on the rating label.
•
Connect the mains cable to a properly installed and earthed wall outlet.
Startup / Operation
Startup / Operation
Startup / Operation
Startup / Operation
Prior to first use
Prior to first use
Prior to first use
Prior to first use
CAUTION
CAUTION
CAUTION
CAUTION::::
After transport, the device should be left standing for 4 hours in order for the oil to be collected in the
compressor.
Nonobservance could cause damage to the compressor and hence result in failure of the
device. This would void your warranty claim.
•
Clean the interior of the device including all accessory parts located inside. Please consider the
instructions that we have included for you in the chapter on “Cleaning”.
Turning on
Turning on
Turning on
Turning on
•
Turn on the unit by connecting the device to the power supply. The mains power control lamp
POWER lights.
•
Operate the temperature control, which is located on the device front. See also the following sec-
tion "Settings".
Settings
Settings
Settings
Settings
Setting AUS
AUS
AUS
AUS means that the unit is in the off state. Turn the temperature control clockwise, starting
from this setting; the device will turn on automatically. The operating control lamp BETRIEB lights.
The power levels 1111 – 6666 regulates the different values of the internal temperature.
Setting AUS
off state
Setting 1:
lowest setting (warmest inside temperature)
Setting 6:
highest setting (coldest inside temperature)
POWER:
mains power control lamp
BETRIEB:
operating control lamp
ALARM:
warning lamp for temperature rise
Turning the temperature control clockwise will lower the inside temperature. Please keep in mind that
the temperature changes with the ambient temperature (of the location), with the frequency of lid
opening and the amount of food in the device.
During initial operation, turn the temperature control to the highest setting first, until the device has
reached the desired operating temperature. Afterwards it is recommended to turn the control back to a
medium setting; correcting the temperature at a later point would then be easier.
Warning lamp
Warning lamp
Warning lamp
Warning lamp ALARM
ALARM
ALARM
ALARM
If the freezing operation is broken or without power supply during a long period, the inside temperature
can be increase. If the temperature rises up to -9°C the warning lamp ALARM lights for warning.
