BZ6029CB_IM
07.03.19
39
Problema
Posible causa
Solución
Se produce de-
masiada espuma
cuando se suministra
cerveza.
El barril parcial de 5 litros no está lo suficiente-
mente frío.
Enfríe el barril de cerveza de 5 litros durante
más tiempo.
El barril de cerveza de 5 litros ha sido agitado.
Deje el barril de 5 litros en descanso sobre el
surtidor de cerveza durante un tiempo.
La cerveza no fluye libremente por el tubo.
Abra la toma de cerveza al completo.
El vaso se sostiene hacia arriba cuando se
suministra.
Incline el vaso cuando suministre para que la
cerveza pueda fluir por el lateral del vaso.
La presión de CO
2
en el barril es demasiado alta. Girar el regulador de presión a la posición “ ”.
Se tarda un tiempo hasta que se libera la
presión del barril y se reduce la cantidad de
espuma.
No se produce
suficiente espuma
cuando se suministra
cerveza.
La presión de CO
2
en el barril es demasiado baja. Girar lentamente el regulador de presión hacia
“ ” durante 5 segundos.
La cerveza está demasiado fría.
Deje que el barril repose en el surtidor un
momento. A continuación, la temperatura del
barril será corregida por la unidad.
Existen residuos de grasa, líquido de limpieza u
otros restos en el vaso.
Limpie el vaso al completo y posteriormente,
enjúaguelo con agua fría.
El vaso está demasiado caliente.
Enjuague el vaso con agua fría.
El vaso está seco.
Enjuague el vaso con agua fría.
La cerveza está
turbia.
La cerveza está demasiado fría.
Deje que el barril repose en el surtidor un
momento. A continuación, la temperatura del
barril será corregida por la unidad.
El manguera de cerveza no está limpio.
Limpiar la manguera de cerveza.
La cerveza se enfrió inadecuadamente antes de
utilizar el surtidor de cerveza.
Utilice un barril enfriado.
La cerveza está de-
masiado caliente.
El barril no está lo suficientemente enfriado.
Enfríe el barril durante más tiempo.
Las ventilaciones están cubiertas. No hay espacio
suficiente tras el surtidor.
Destape las ventilaciones.
Coloque el surtidor de forma que haya un
espacio mínimo de 15 cm en todos los lados.
El sabor de la cer-
veza es llano.
La presión de CO
2
es demasiado baja.
Girar lentamente el regulador de presión hacia
“ ” durante 5 segundos.
La fecha de consumo ha vencido.
Utilice un nuevo barril.
El barril se ha tapado durante demasiado tiempo. Utilice un nuevo barril.
La cerveza fluye
demasiado despacio
por la toma de la
cerveza.
El cartucho de CO
2
está vacío.
Cambie el cartucho de CO
2
.
La presión de CO
2
en el barril es demasiado baja. Girar lentamente el regulador de presión hacia
“ ” durante 5 segundos.
La cerveza no fluye libremente por el tubo.
Abra la toma de cerveza al completo.
El surtidor no se
cierra.
La unidad de surtido no está correctamente insta-
lada y obstruye el surtidor.
Instale la unidad del surtidor correctamente.
Es difícil instalar la
unidad del surtidor en
el barril.
La tapa del barril no fue humedecida antes del
tapado.
Humedezca la tapa del barril con agua fría.
Содержание BZ 6029 CB
Страница 75: ...BZ6029CB_IM 07 03 19 ...
Страница 76: ...BZ6029CB_IM 07 03 19 ...
Страница 77: ...BZ6029CB_IM 07 03 19 ...
Страница 78: ...BZ6029CB_IM 07 03 19 Stand 02 2019 C Bomann GmbH Internet www bomann germany de Made in P R C BZ 6029 CB ...