Bomag BW 900-2 Скачать руководство пользователя страница 63

Страница: 63 / 72

Every 2000 operating hours

BOMAG

BW 900-2

Every 2000 operating hours

5.23 Changing the hydraulic oil

Danger

Danger of scalding!

Danger of scalding by hot hydraulic oil.

Caution

Do not start the engine after draining the hy-
draulic oil. Never run pumps without oil.

Environment

Environmental damage

Catch and dispose of old oil environmentally.

Note

Apart from the normal oil change intervals, the hy-
draulic oil must also be changed after major re-
pairs in the hydraulic system.

Change the hydraulic oil filter with every hydraulic
oil change (see next chapter).

See also chapter 5.1 "Notes on the hydraulic sys-
tem".

Drive the machine until the hydraulic oil has
reached operating temperature.

Clean the area around the fuel filler neck.

Remove the filler cap.

Fig. 98

Unscrew the leak oil line from the vibration mo-
tor and catch the old oil (Fig. 98).

Connect the leak oil hose again.

Fig. 99

Note

We recommend to use a filtering unit with fine filter
to fill in hydraulic oil.

For quality and quantity of oil refer to the table

of "fuels and lubricants".

Fill in new hydraulic oil (Fig. 99).

Do not remove the screen filter during this
process.

Attach the filler cap.

Check the hydraulic oil level on the dipstick.

Perform a test run and check the system for
leaks.

Bleeding the hydraulic system

Run the engine max. 3 minutes with low
speed, the hydraulic system will be bled during
this time.

Содержание BW 900-2









































































Результаты поиска

Содержание BW 900-2

Отзывы:

Бренды по названию

Популярные бренды

Bomag BW 900-2, Руководство по эксплуатации

Результаты поиска

Содержание BW 900-2

Отзывы:

Бренды по названию

Популярные бренды