Bomag BW 900-2 Скачать руководство пользователя страница 30

Страница: 30 / 72

Operation

BOMAG

BW 900-2

4.1

General notes

Please read section 3 Indicators and Control Ele-
ments thoroughly before operating the machine if
you are not yet fully familiar with the indicators and
control elements of the machine.

All indicators and control elements are described
in detail in this chapter.

4.2

Tests before starting to op-
erate

The following inspections must be carried out be-
fore each working day or before a longer working
period.

Danger

Danger of accident!

Please observe strictly the safety regulations
in chapter 2 of this instruction manual!

Park the machine on ground as level as possi-
ble.

Check:

fuel tank and fuel lines for leaks

bolted connections for tight fit

function of steering

machine for cleanliness, damage

availability of the appropriate operating and
maintenance instructions,

check whether the machine has been properly
serviced

engine oil drain hose plug tight

Note

For a description of the following tasks refer to the
chapter "maintenance every 10 operating hours".

Engine oil level

Hydraulic oil level, if necessary fill up

Hydraulic oil filter contamination indicator

Danger

Fire hazard!

Do not refuel in closed rooms.

Fuel level, if necessary fill up.

Water level in sprinkler system, if necessary fill
up.

Scrapers, if necessary adjust.

Содержание BW 900-2









































































Результаты поиска

Содержание BW 900-2

Отзывы:

Бренды по названию

Популярные бренды

Bomag BW 900-2, Руководство по эксплуатации

Результаты поиска

Содержание BW 900-2

Отзывы:

Бренды по названию

Популярные бренды