5
FEATURES
(1)
This machine may be used for surface cutting, drilling, milling, boring
and tapping.
(2)
This machine is of fine quality, can be operated easily, it is not limited
to skilled operator.
(3)
The drilling and milling operation can be performed by two methods:
1)Hand operation, which makes quick feeding drilling or slow feeding
milling
2)Auto-feed operation, the machine have six different feeding for
drilling.
(4)
Many of the adjustable nuts are bronze, for adjusting thread clearance
and reducing wear. these bronze parts also allow screws to rotate smoothly
and improve accuracy.
(5)
The vertical column is very strong and stiff, which makes the machine
very stable and improves accuracy of manufactured parts.
(6)
The machine headstock is cast iron, it has been heat-treated,
stress-relieved, and precision machined.
(7)
Machine gears are ground for smooth operation.
(8)
Speeds and feeding can be easily changed.
(9)
Tapping can be done in either rotation, working depth can be controlled
by using a positive stop gauge.
(10)
The head can be turned in two rotation for a satisfying desired angle.
INSTALLATION
(1)
Ensure the headstock is as lower as possible, and be fixed on the column
tightly before moving machine. while moving machine, keep its balance
and safety.
(2)
Don’t mount the machine at the sunshine place to avoid the deformity
of machine and the loss of accuracy.
(3)
Mount machine to a sturdy table or a solid concrete foundation, it’s
advisable that the base you choose be well constructed to avoid any
vibration during operation.
(4)
Thoroughly clean the machine with a commercial degreaser, and then coat
all bright metal with a light lubricant to prevent corrosion.
(5)
Level the surface of the worktable on both lengthwise and crosswise by
using a precision level.
(6)Remove the oil filler plug and fill the oil to the gear box until the oil
level reaches the middle of the oil fluid level indicator. Lubricate all
