6
points
OPERATION
Notice: Check all parts and safety precautions for
proper condition before operation
1.
Change speed handle
2.Feed handle 3.micro feed knob
4.Crank 5.Longitudinal handwheel
6.Cross auto-feed handle
7.Cross lock handle 8.Longitudinal
lock handle 9.Longitudinal auto-
feed handle 10.Cross handwheel
11.Change table feeding knob
12. Quick-feed handle 13. Adjust
positive stop gauge knob
14.Rack quill lock handle
15.Change spindle feeding
Knob 16.Electric box
17.Positive depth stop gauge
1.
Use of main machine parts
(1)Raise and lower the headstock on its rack and pinion mechanism by using
the crank(4). when the desired height is reached, tighten the bolts
to avoid vibration.
(2)Head may be rotated 180°by loosening the three lock nuts. Adjust the
head to the desired angle, then tighten the heavy duty head lock nuts.
(3)The knobs is setted for MILLING & DRILLING, TAPPING ,STOP AND TABLE
FEED. The mushroom head red push button for emergency stop while
milling and drilling, the green push button for starting.
(4)When hand-feeding the spindle, push the feed handle(2) in;
and micro-feeding the spindle, push the handle(2) out, turn the
knob(15) to
“
0
”
position, then operate the knob(3).when auto-feeding
the spindle, turn the knob(3)to select a mount of feeding.
(5)Move the table from side to side by using longitudinal handwheel(5),
and from front to back by using the cross handwheel(10).
