Bolin Technology 2 Series, Руководство пользователя

Страница: 28 / 36

28
OUTDOOR AUTO: This is an auto white balance mode specifically
for outdoors. It allows you to capture images with natural
white
balance in the morning and evening.
PICTURE Menu
SHARPNESS:
Picture sharpness value ranges from 0 to 15. You can enjoy
emphasized edge and high-resolution images.
EFFECT: (Picture Effect)
It consists of the following functions:
Image effect from Off, B&W
NOISE REDUCTION:
Noise reduction - you can enjoy clearer images by removing unnecessary noise. You can select 6 levels from OFF (MIN),
1 to 5 (MAX).
FLIP:
Image E-Flipper – Used when ceiling mounting or upright mounting. Set to OFF is upright mode, set to ON is for ceiling
mount.
MIRROR:
You can have the image as seen in a mirror, with the right side as though it were the left.
DE-FLICKER:
You can turn it ON if the Video output format frame rate is difference from your country’s electricity Frequency.
GAMMA:
In this mode, the gamma can be set to value from 0 to 1.
WDR: (Wide dynamic range mode): WDR feature is available on certain product models.
Wide Dynamic: ON, OFF. The camera distinguishes light and dark areas within the same scene, adjusts the brightness
for dark areas, and also controls the blown-out highlights.
You can select the wide dynamic range mode between ON and OFF
SATURATION
You can configure the color gain from 1-15. Use this setting when bright color is particularly important.
CONTRAST
You can adjust the contrast level in the range from 0 (00h) to 255 (FFh). The initial setting is 128 (80h). The smaller the
value is, the lower the contrast becomes, and the larger the value is, the higher the contrast becomes.
PAN TILT ZOOM Menu
The PAN TILT ZOOM menu is used to select the pan/tilt/
zoom mode.
DIGITAL ZOOM:
Set to DIGITAL ZOOM ON, 2X digital zoom is activated.
You can set digital zoom to ON or OFF. When set to OFF,
digital zoom does not operate, and only optical zoom is
available.
When digital zoom is available, the resolution decreases
ZOOM RATIO OSD (Zoom times display):
Set Ratio OSD to ON, the number of the zoom ratio that
you are operating displays on screen.
ADAPTIVE P/T:
Set to ON, Pan Tilt speed would be adaptive with the zoom range
.
Turn ON to automatically adjust the Pan and Tilt speed with various zoom ratios. For example, the higher
zoom ratio you use, the slower the speed of P/T.
MF SPEED:
Manual Focus variable speed, that has eight speed levels.
P/T SPEED:
Set P/T Speed value to from 0 to 5 (The speed from low to high), to change the speed of P/T on remote controller.
EXPOSURE
WHITE BALANCE
>PICTURE
PAN TILT ZOOM
> SYSTEM
OSD
SHARPNESS 3
EFFECT 0FF
NOISE REDUCTION 3
FLIP OFF
MIRROR OFF
DE-FLICKER OFF
GAMMA 0
WDR OFF
SARURATION 5
CONTRAST 7
PICTURE MENU
EXPOSURE
WHITE BALANCE
> PICTURE
>PAN TILT ZOOM
> SYSTEM
OSD
DIGITAL ZOOM OFF
ZOOM RATIO OSD 0FF
ADAPTIVE PT ON
MF SPEED 2
P/T SPEED 3
PRESET SPEED 5
PAN DIR NORMAL
TILT DIR NORMAL
PAN TILT ZOOM MENU
WB MODE OUTDOOR AUTO
WHITE BALANCE MENU