Bolin Technology 2 Series, Руководство пользователя

Страница: 10 / 36

10
System Configuration
Connection
In this connection configuration, HDMI cable, SDI video cable, data cable, Network cable is required. To obtain these third-
party components or accessories,
Power
•
Use only the DC power adaptor (JEITA type4) supplied with the unit. Do not use any
other DC power adaptor.
•
If using POE to power the camera, PoE+(IEEE802.3at) is supported
•
Ensure that the POE power source has sufficient power budget to power the camera, or some features may not
function properly.
Cable Requirements
•
Network Cable: 10/100 Mbps Ethernet CAT
5/5E/6 UTP cables are applicable to the
ANSI/EIA/TIA-568A/B and ISO/D. Eight
wires in the network cable need to be
inserted in parallel into the top of the cable
connector. The cable connector needs to be
crimped in position. When the cable
connector is in position, ensure that the metal
pieces of the cable connector are parallel to
each other and the clamp of the cable
connector is intact.
•
SDI Cable: For broadcast use,
Belden1694A/5CFB is a suitable cable to
transmit broadcast-quality video: