-25-
4.Set Right Limit:
This sets the right edge of the
area to be scanned.
Move to right limit
Call preset 1 to confirm
Call preset 2 to cancel
Move the joystick to desired position,and then choose
to save or cancel as the above picture indicated.
5.Default Speed:
This sets the scannig speed ranging
from 001 to 255.
6.Run Continuously
: The current autoscan mode is run
continuously .
7. Delete Current
: The current autoscan mode is
deleted.The following picture is displayed on the screen.
Deleting.....
5.5 Regions Setup
Main menu
•
Function Setting
•
Regions Setup
Regions Setup
====================================
1.Region Number
:001
2.Name
:Region 1
3.Set Left Limit
4.Set Right Limit
5.Delete Current
6.Back
0.Exit
A region is an area between two sites. User can edit a
title for a REGION. (E.g. Dangerous area). Whenever
the camera moves into the region, the title will display
on the screen to alert the user.
•
Up to four regions can be set.
1.Region Number
:It sets the autoscan mode number,
ranging from 001 to 004.
2.Title
: It sets the name for the region,which can be
displayed on the screen.Please refer to page 11 in details.
3.Set Left Limit:
This sets the left edge of the region.
Move to left limit
Call preset 1 to confirm
Call preset 2 to cancel
Move the joystick to desire position,and then choose
to save or cancel as the above picture indicated.
4.Set Right Limit:
This sets the right edge of the region.
Move to right limit
Call preset 1 to confirm
Call preset 2 to cancel
Move the joystick to desire position,and then choose
to save or cancel as the above picture indicated.
Edit Region Name
====================================
1.Input: [
]
2.Back
===================================
Uppercase (Zoom Shift)
