-23-
[Preset Number -Dwell Timer]
====================================
[001-002][002-004][003-002][004-001]
[000-002][000-002][000-002][000-002]
[000-002][000-002][000-002][000-002]
[000-002][000-002][000-002][000-002]
[000-002][000-002][000-002][000-002]
[000-002][000-002][000-002][000-002]
[000-002][000-002][000-002][000-002]
[000-002][000-002][000-002][000-002]
Save and Exit
Discard
3.Edit Sequence
:This sets order and pause time spent
at each preset position.It is possible to set 32 positions
as shown in the following illustration.
4.Run Only Once
: The current sequence is run only
once.
5.Run Continuously
: The current sequence is run con-
tinuously and the system will loop the sequence.
6. Delete Current
: The current sequence is deleted.
The following picture is displayed on the screen.
E.g. 003-002 means that preset 003 is accessed and
paused for 2 seconds. Move joystick to the left or right
to select editing item, and then move it to up or down to
change value.
Take the above picture for example, the camera rotates
from preset 1 to preset 4 and the pauses time is for 2
seconds, 4 seconds, 2 seconds, 1 second respectively.
Select
Save
to save the sequence, select
Discard
to quit
without saving.
Note:
When a preset
’
s dwell time is set 0, system
will skip that preset. System will consider pre-
set 0 as the end of a sequence.
Deleting.....
Pattern Setup
====================================
1.Pattern Number
:001
2.Title
:0
3.Record New Pattern
4.Run Only Once
5.Run Continuously
6.Delete Current
7.Back
0.Exit
5.3 Pattern Setup
Main Menu
•
Function Setting
•
Pattern setup
A pattern records and repeats a series of pan,tilt,zoom
and preset function.The difference between sequence
and pattern is that in a sequence, the camera moves from
a preset to next at a fixed speed; in a pattern, the camera
moves flexible curve at various speed.
•
Up to four pattern mode can be set.
•
Each of them can be set a duration of up to 180
seconds at maximum.
1.Pattern Number
:It sets the pattern number ranging
from 1 to 4.
2.Title
: It sets the name for the pattern,which can be
displayed on the screen.Please refer to page 11 in details.
Edit Preset Title
====================================
Input: [
]
Back
3. Record New Pattern
: This records each commands
used for pan,tilt, and zoom operations.
Move the joystick at random firstly, and then press
the 1 numerical and PRESET button of the system
controller to start record.The following picture will
display on the screen.
===================================
Uppercase (Zoom Shift)
