Bolide Technology BC2002-AT88, Руководство пользователя

Страница: 19 / 38

-17-
2. Lens Parameters
Auto Recovery
====================================
1.Joystick Recover: ALL
2.A/F Recover Time:005
3.A/I Recover Time:005
4.Back
0.Exit
Lens Parameters
====================================
1.Zooming Speed :High
2.Max Digital Zoom :Off
3.Focus Limit :1cm
4.Vibration Correction: Off
5.Iris ALC Value :000
6.Iris PLC Value :000
7.Auto Recovery
8.Day/Night Mode
9.Back
0.Exit
Day/Night Mode
====================================
1.Day/Night Mode: AUTO
2.Day Start Time: 00:00
3.Night Start Time:00:00
4.Back
0.Exit
Main menu • Lens Parameters
2.1 Zooming Speed
This function allows the user to define how fast the cam-
era will zoom. Available settings includes the following:
High
: High zooming speed
Low
: Low zooming speed
2.2 Max Digital Zoom
Max Digital zoom magnifies the picture by duplicating
pixels. The picture is enlarged but the resolution re-
mains the same. This menu item sets max. digital zoom
magnification times.
OFF
: Turn off digital zoom
X1-~ X10
: Max digital zoom times
NOTE: Different camera has different Max. digital zoom
times.
2.4 Vibration Correction( Some camera only)
This prevents the image from intensively vibration,eg.
the system is installed on the highway in the condition
of vehicles frequently passing.
2.5 Iris ALC Value( Some camera only)
This sets the iris average level control value. The value
ranges from 000 to 255.Default value is illustrated as
below:
22X color camera: 066,
23X color/mono camera: 084 (different camera has
different ALC default value)
Note:
Changing default value is strongly
NOT
recommended.
2.3 Focus Limit
The focus limit sets the minimum distance between the
object and the camera. Focus is not achieved if the dis-
tance is less than the current setting. The following
values for focus limit are available:
1cm.10cm,30cm,100cm
This sets the iris peak level control value. The value
ranges from 000 to 127.
Default value: 23X color/mono camera: 016
(different camera has different PLC default value)
Note: Changing default value is strongly NOT
recommended.
2.7 Auto Recovery
This uses to configure the auto focus and auto iris re-
sume settings. Four settings are available:
2.8 Day/Night Mode
The Day/Night mode automatically switches between
color and monochrome mode in accordance with the
environment illumination. Four settings are available:
2.6 Iris PLC Value( Some camera only)
Setting Description
All
Both return to auto focus and return to auto
iris setting are enabled.
default setting)
None
Both return to auto focus and return to auto
iris setting are disabled.
Iris Only return to auto iris is enabled.
Focus Only return to auto focus is enabled.
Setting Des cription
Auto
The dome will automatically change modes
according to light condition.
Day The dome is in colorful mode only.
Night The dome is in monochrome mode only.
Time Set s chedule for mode change.