Bogen ORATOR, Руководство пользователя, Страница: 13 / 20

Charging Dock Indicators
Active
Indicators near the charging docks report the status of the two OMX1 channels. When a
channelʼs associated active indicator is illuminated, the channel is receiving valid IR
transmissions.
Charge
When OMX1 is being charged, the indicator illuminates GREEN. Charging is complete when
the indicator is extinguished. A fault condition is signaled by a RED indicator. A fault condi-
tion may indicate a problem with the battery.
IMPORTANT: When replacing batteries use only Bogen P/N 45-7543-05.The use of other
batteries will void the warranty and may result in product damage or fire .
Charging OMX1 MIC/Transmitter Units
OMX1 units are inserted into the charging dock with their front facing up and their tops fac-
ing out as shown. If the OMX1 has a dock selection tab installed (see page 11), it will only fit
into one of the docks. The charging docks have a retention feature to hold the OMX1 against
the charging contacts at the bot-
tom of the dock. A mechanical
click is noticeable when the OMX1
is fully inserted into the dock. When
an OMX1 is inserted, its charge
indicator will illuminate shortly
thereafter. You may also hear a
confirmation tone over the system
speakers if the unit is powered on
and the confirmation tone feature
has been enabled. The ORB35
receiver/base unit does not have to
be powered on for the OMX1
MIC/Transmitter units to charge.
The charge indicator will extinguish
when fully charged.
The ORB35 Receiver/Base unit includes a rotating cover.
A key lock to the left of the cover allows it to be locked to
provide a measure of security to the OMX1 units and
accessories when they are not in use. The cover lock can
be left unlocked so the cover can operate freely or it can
be locked in the open position when the cover feature is
not desired.
To open the cover when unlocked, use tab or finger hole
on the lower left of the cover to rotate the cover up. If in
the open position and unlocked, pull on the coverʼs tab
and rotate closed. The coverʼs operation is mechanically
dampened.
9
ORB35 Receiver/Base Unit
ORB35 Rotating Cover
When storing the OMX1 MIC/Transmitter
into the ORB35 Loading Dock for charging,
insert it on a slight angle, with the front face
of the OMX1 pointing up.
Charging
Contacts
SIDE
VIEW
MIC/Transmitter
Accessory Storage Area
OMX1
FRONT
VIEW
“A” Programmed OMX1
Dock Selection Tab is towards
the center of dock station
“B” Programmed OMX1
Dock Selection Tab is towards
the center of dock station