Bogen NYQUIST NQ-GA20P2, Руководство по настройке

Страница: 27 / 36

19
6.4 Setting High Pass/Low Pass Parameters
You can set the band of frequencies that will pass through the high
pass and low pass filters and select the type of filter that is used
through the channel’s High/Low Pass drop-down menu option.
To adjust the high/low pass parameters for a channel:
Step 1 On the appliance Web UI’s main page, select DSP .
Step 2 Select the Menu button for the channel.
Step 3 From the drop-down menu, select High/Low Pass .
Step 4 Set the parameters described in the following table:
Figure 9, High/Low Pass Parameters
Note:
If you want to return to the factory settings, select the Reset icon that
appears in the right corner.