Bogen NYQUIST NQ-GA20P2, Руководство по настройке

Страница: 31 / 36

23
6.6 Adjusting Outputs
Selecting Outputs allows you to enable and adjust volume levels for
speaker and line outputs.
To adjust outputs for speaker or line:
Step 1 On the appliance Web UI’s main page, select DSP .
Step 2 Select the Menu button.
Step 3 From the drop-down menu, select Outputs .
Step 4 To enable outputs for a speaker or line, select Enable
for the corresponding output.
Decay Sets the rate for turn off of the limiter after
the signal is below the threshold. Decay
range is 5 to 2300 milliseconds.
RMSTC Sets how fast the limiter reacts to the above
threshold signal. RMSTC range is 50 to
10000.
Figure 11, Outputs
Table 9, Limiter Settings (Continued)