[MBA_NKBD_EN] Rev.: 10/2015
53
No liability accepted for translation or printing errors. Subject to changes in dimensions, weights and other technical data.
All rights reserved. Modifications, reprints and photomechanical reproduction, even in extract from, require the express permission of BOGA GmbH, Werkstraße 16, D-59494 Soest.
BOGA GmbH
• Werkstraße 16 • D-59494 Soest • Fon: +49 2921 96943-0 • Fax: +49 2921 96943-29 • [email protected] • www.airwin.net
Care and cleaning tasks
1. Checks
Check the air duct, the fluid tank and
the transducers for contamination.
Clean them, if necessary!
Initially, a check has to be carried out after 1 week.
Depending on the degree of contamination of the fluid tank and the
transducers the cleaning intervals must be adjusted.
If pollution is found during the check, cleaning must be performed.
2. Care and cleaning
see Chapter 20
- Fluid tank
- Transducers
Slime in the fluid tank is a sign of the presence of micro-organisms!
Cause: Air and/or water
Incrustations are mineral deposits!
Cause: Water
Measures
Check and clean the air duct, if required!
Check reverse osmosis system!
Adjust cleaning intervals!
Even without visible pollution, cleaning must be done at least
every 12 months.