background image

 

 

SAFETY PRECAUTIONS 

 

Thank you for purchasing our products. Even though we have gone to great efforts to ensure the quality of each product, occasional errors, and/or 

omissions do occur. In any event should you find this product to be defective or missing a part, please contact the shop of purchase?  

 

Be sure to read the entire manual before assembly and operation. Also, please note the following safety precautions: 

 

 

Before beginning any exercise program consult your physician. 

 

Keep children and pets away from this equipment at all times, this is not a toy. 

 

Only one person at a time should use this equipment. If dizziness, nausea, chest pains, or any other abnormal symptoms are experienced whilst 

using this treadmill, stop the workout at once and consult a physician immediately. 

 

The treadmill should not be used by persons weighing more than 

110 kg

. Never allow more than one person at a time on the treadmill. 

 

Inspect your treadmill prior to exercise to ensure that all nuts and bolts are fully tightened. 

 

Keep hands and feet away from all moving parts. 

 

Always use this treadmill on a clear and level surface. Do not use it outdoors or near water. 

 

Do not insert any object into any openings. 

 

Before using this equipment to exercise, always do stretching exercises to properly warm up by slowly walking for 5 minutes on the treadmill. 

 

Always wear proper clothing with walking or jogging shoes when exercising. Do not wear loose fitting clothing that may get caught in the equipment. 

 

Turn off the power after usage. 

 

Pregnant women should consult with their physician before beginning an exercise program. 

 

Drink hydrating fluids (water) before, during and after any exercise. 

 

This treadmill is designed for home use only. Do not use for light institutional or commercial applications.     

 

Assemble and operate the treadmill on a flat, solid surface.   

 

Please make sure that there must be a safety area of 2000 mm × 1000 mm behind the treadmill while exercising. 

 

Before using this treadmill please lubricate the running belt first. In prolonging the life of this treadmill, ensure that lubrication is checked regularly 

between schedules. 

 

The high level of security of equipment can only be kept, if regularly checked for damages and abrasion. Please pay special attention to the rear 

roller cover, Antiskid pad, handlebars, side rail and running belt. Please read this manual carefully and observe the instructions. 

 

Damage parts need to be replaced instantly and please only exercise again once properly repaired. 

 

Please make sure during set-up, there is enough space available around the treadmill. 

 

Please pay attention that levers or other adjusting mechanisms do not interfere with the moving area during exercise. 

 

- 1 -

Содержание J4715

































Отзывы: