background image

 

 

GENERAL OPERATION   

MANUAL MODE/QUICK START

   

Press the          key, the treadmill will start running at 0.8 km/h. You can set the speed by the speed

 

setting

 

key on the right side. Every Press of          key on 

the right side, the speed will increase by 0.1 km/h. Press the speed        key continuously the speed will increase rapidly to 12 km/h. Every Press of speed     

 

key, the speed will decrease 0.1 km/h. Press the speed          key continuously and the speed will decrease rapidly down to 0.8 km/h. 

 

INCLINE MODE

 

You can set the incline grade by the 

INCLINE 

setting

 

key on the left side. Every Press of incline        key on the left side, incline grade will increase by 

1%. Press and hold down the incline        key and the incline grade will increase rapidly until 15%. Press the incline          key the incline will decrease 

by 1%. Press and hold down the incline          key, the incline will decrease rapidly. After setting the incline grade, press the          key starts the belt in 

motion. 

 

 

PROGRAM MODE 

Press the            key to select the program between P1 and P6, and the selected program will be showed on the window. Firstly press the    

      key 

on the right side to set time, the total time of the program selected can be adjusted between 10 minutes and 99 minutes, then press the     key, the 

treadmill will start operating at the speed value and the incline grade in accordance to the Program selected. The timer will now begin to countdown 

 

Preset program 1 

level  1  2  3 4 5 6 7 8 9 10 

speed  2  4  6 8 7 5 4 3 3  2 

incline  0  1  2 1 2 1 2 1 2  2 

 

 

 

 

- 21 -

Содержание J4715

































Отзывы: