9
STEP 3
Remove the clamp (25) and allen screw (22) from front post (4). Attach handlebar (5) to
front post (4) and tighten with clamp (25), allen screw (22), cover for clamp (37) and
T-type knob (21).
Insert hand pulse wires (20) into the grommet (32) and pull out from top bracket. Attach
hand pulse wires (20) and middle computer wire (33) to the computer (6) accordingly.
Tighten with 2 screws (27) which are pre-assembled on the back of computer (6).
5
20
6
32
27
22
25
21 37
33
4
STEP 4
Slide the seat (8) to seat post (7), tighten with a flat washer (12) and club knob (42).
Insert seat post (7) into main frame (1) through the
cover for seat post (36). Line up the
holes and secure seat in position with quick release knob (11).The correct height for
seat can be adjusted after the bike is fully assembled.
11
7
8
12
36
1
42
