Bodytastic TurboSpin 96RV, Руководство пользователя

Страница: 16 / 28

14
Owner’s Manual
HOW TO USE
Seat forward-and-backward adjustment
1. Once the seat is in the desired position, dismount the bike and adjust the
seat forward-and-backward position.
2. Loosen the knob under the seat slider by turning counterclockwise. Slide
the seat forward and backward to the desire position.
3. When the seat is in the desired position, turn the knob clockwise to firmly
tighten the knob.
4. If necessary, you will need to try several seat height to reset the height for
most comfortable position. Repeat the instruction of the step2 until the seat
is in the desired position.
5. Note the final position number on the seat slider for future reference.

Handlebar adjustment
Proper Handlebar height helps to ensure the maximum exercise efficiency and
comfort. Handlebar height is a matter of preference. Adjusting the handlebars
higher will give the rider a more upright position; lowering them will result in a
more prone position. The handlebar should be adjusted to more accurately if you
feel discomfort in your back.
Handlebar Height adjustment
Do not raise the handlebar height above the STOP mark.
1. Start and position the handlebar at the same height as the seat. Then mount
the bike to feel if it is in the desired position.
2. Turn the handlebar height handle counterclockwise and pull it out to release
it from preset location. Raise and lower the handlebar post to the desire
height. Then release the handle gently until it engages a preset hole on post.
Be sure to tighten the knob firmly by clockwise.
3. If necessary, you will need to try several positions to reset for most
comfortable position. Repeat the instruction of the step 1 & 2 until the
handlebar is in the desired position.
4. Note the final position number on the handlebar post for future reference.