Bodytastic TurboSpin 96RV, Руководство пользователя

Страница: 11 / 28

9
Owner’s Manual
Assembly
Front Stabilizer Assembly
1. Position the front stabilizer
（
1
）
on the frame
bracket as showed in the figure. Make sure the
transport wheel are facing up and toward the
front of the bike.
2. Attach the stabilizer with two hex screws (3
）
, four
flat washers
（
4
）
and two nylon nuts
（
5
）
. Do not
over tightened as the deformation of stabilizer
may occur.
3. Make sure the leveling feet with nut are fullly
screwed into the stabilizer
Rear Stabilizer Assembly
1. Assemble the Foot leveler
（
2-2
）
and Hext Nut
（
2-1
）
onto the Rear Stabilizer
（
2
）
2. Position the Rear stabilizer
（
2
）
on the frame
bracket as showed in the figure.
3. Attach the stabilizer with two hex screws
（
3
）
, four
flat washers
（
4
）
and two nylon nuts
（
5
）
. Do not
over tightened as the deformation of stabilizer
may occur.
4. Make sure the leveling feet with nut are fullly
screwed into the stabilizer