Owner’s Manual
1
SP-Bracket
for Indoor Training Cycles
To see in
FULL COLOR
& additional information,
scan this QR code.
Assembled Parts List - SP Bracket
SP-Bracket v1.5
NOTE:
●
SPX or SPX-Mag use part #10a (larger Hexagon Sleeve)
●
SPR or SPT-Mag use part #10b (smaller Hexagon Sleeve)
Product Assembly
STEP 1: Remove Cap
a.
Remove the existing
Cap Screw (M5 x P1.0 x 10mm L ) (A)
below the
handlebar tube, on the right or left side, using a 4mm Allen Wrench. Set
aside for reinstallation during STEP 3.
b.
Then continue by pulling out the existing
Plastic Hex Cap (B)
from
the handlebar tube.
NOTE:
This
Plastic Hex Cap (B)
will no longer be needed, but you might
want to keep for future use if the SP-Bracket is taken off.
ALLEN WRENCH
4mm METRIC
Recommended Tool:
001-ASM
14
Part #
Assembly Parts List
QTY
SP-Bracket-001-ASM
Bracket Frame Assembly
1
SP-Bracket-010a
Hexagon Sleeve - Large
1
SP-Bracket-010b
Hexagon Sleeve - Small
1
SP-Bracket-014
Cable Clip Mount
5
10a
10b
