manualshive.com logo in svg

BodyCraft Family XPress Pro, Руководство по сборке и эксплуатации

Поделиться
Скачать
BodyCraft Family XPress Pro Скачать руководство пользователя страница 34

34

X2

Step 11:

 Assembly of the Leg Press Cable

1.  Screw the threaded end of leg press cable (116) approx. half way into the receiver on base 

frame (1).  

2.  Route the cable up and over the lower pulley in adjustable pulley block (30).
3.  Route the cable down and under the pulley on the weight stack base (5) as shown in fig. 3.  
4.  Route the cable under weight stack base (5) as shown in fig. 1 and around horizontal pulley on 

leg press main frame (46).  

5.  Route the cable under and around lowest pulley mounted on rear leg press support (52).
6.  Route the cable under and around the right pulley (perspective from a person on the seat) on 

leg press main frame (46).

7.  Route the cable over and around top pulley on rear leg press support (52), under and around 

left side pulley on leg press main frame (46) as shown in fig. 5.  

8.  Hook the terminal end of cable on bracket on rear leg press support (52) as shown in fig. 6.

Содержание Family XPress Pro

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды