manualshive.com logo in svg

BodyCraft Family XPress Pro, Руководство по сборке и эксплуатации

Поделиться
Скачать
BodyCraft Family XPress Pro Скачать руководство пользователя страница 26

26

X2

Step 5:

 Assembly of the Press Cable

 

L

NOTICE

Assemble cables and pulleys at the same time.

1.  Attach the loop end of press cable (109) to the bracket on the front upright (4).  
2.  Route the cable over and around the left side (perspective from a person on the seat) of the 

pulley mounted in press arm selector (12).

3.  Route the cable under and around the pulley mounted in front upright (4).
4.  Route the cable over and around the pulley on the right side in press arm selector (12) as 

shown in fig. 2.  

5.  Route the cable through (uppermost) slot and over the pulley in front upright as shown in fig. 

3.  

6.  Route the cable under top pulley in adjustable pulley block (30), up and over the pulley 

mounted on top frame (10)  as shown in fig. 4.

7.  Route the cable down and around top pulley in adjustable pulley block (30) up and over pulley 

mounted in weight stack top (8 & 9) and down to the weight stack.  

8.  Screw the end of the press cable (109) into selector rod (95) with at least 7 threads as shown in 

fig. 6.

Содержание Family XPress Pro

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды