manualshive.com logo in svg

BodyCraft Family XPress Pro, Руководство по сборке и эксплуатации

Поделиться
Скачать
BodyCraft Family XPress Pro Скачать руководство пользователя страница 20

20

X2

Step 3:

 Assembly of the Seats Part 1

1.  Assemble the front seat frame (18) to the front upright (4) with two bolts (128), four washers 

(147) and two nuts (154).  

2.  Assemble the front seat frame (18) to the base frame (1) with one bolt (126), two washers (147) 

and one nut (154).

3.  Attach the leg extension arm (20) to the front seat frame (18) by inserting the leg extension 

axle (39). 

4.  Fasten the leg extension axle (39) using two washers (148), two spring washers (150) and two 

set screws (137). 

5.  Attach the plug (64) to the front of seat frame (18) and plug (66) to the top and bottom of leg 

extension arm (20). 

 

L

NOTICE

Make sure that the leg extension arm pivots freely.

6.  Use the L Pin (81) to lock the leg extension arm (20).
7.  Insert tube (31) into the front seat adjuster (19).  

 

L

NOTICE

Use window cleaner or water for better sliding of roller pads onto tubes.

8.  Moisten foam pads with foam pad covers (103 & 88) and  slide it onto each end of tube (31).  

 

L

NOTICE

It is recommended to use a rubber mallet.

9.  Assemble two plastic covers (66) to both foam pads with foam pad covers (103 & 88) and 

secure the pads with two washers (69) by using two screws (157) and two washers (173).  

10.  Lock tube (31) into place with pre-assembled set screw.
11.  Assemble the seat pad (105) to the front seat adjuster (19) with two washers (147) and two 

bolts (133). 

12.  Attach the plug (68) to the front seat adjuster (19).  
13.  Insert the front seat adjuster (19) into the front seat frame (18) and secure with one spring 

(175) and lock with locking spring knob (79).

14.  Assemble the seat back adjuster (23) to front upright (4) with one bolt (128) and one nut (154). 

It may be necessary to tighten this bolt, then loosen just enough to let the seat back adjuster 

(23) pivot freely.  

 

L

NOTICE

The longer pop pin (77) should seat in the adjustment holes in the seat back adjuster (23). 

15.  Slide two metal hinges (24) onto the axle on top of the seat back adjuster (23).
16.  Assemble the back pad (104) to the metal hinges (24) with four washers (147) and four bolts 

(134).

17.  Insert tube (31) into the leg  extension arm (20).  

 

L

NOTICE

Use window cleaner or water for better sliding of roller pads onto tubes.

Содержание Family XPress Pro

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды