BodyCraft BC-735, Руководство по сборке и эксплуатации

Страница: 15 / 52

Mini XPress
15
4. Attach the upright (3) to the base frame (1) using four screws (62), eight washers
(74), and four nuts (77).
5. Insert two guide rod holders (50) into the rear stabilizer (2). Slide a rubber donut (42)
onto the end of each guide rod (5). Insert the guide rods (5) with rubber donuts (42)
into the guide rod holders (50) in the rear stabilizer (2).
6. If you did not purchase optional weight stack, please skip this step. Slide each 10 lb.
Plate (18) over the guide rods (5). Make certain that each plate is oriented with the
selector hole on bottom and facing forward. Attach two way top plate (17) to the
selector rod (19) using the top plate bolt (69).
7. Slide two way top plate (17) onto the guide rods (5).
8. Insert two guide rod holders (50) into the top guide rod retainer (7) slide top guide
rod retainer (7) onto the top of the guide rods (5). Attach the top guide rod retainer
(7) and the connect plate (23) (do not attach connect plate (23) if you purchased the
optional lat attachment) to the upright (3) using two screws (61), fourwashers (74),
and two nuts (77).
Insert two 50mm plugs (48) into each
end of the top guide rod retainer (7).