Body Solid EXM2500, Инструкция по сборке и руководство пользователя

Страница: 30 / 56

30
STEP
4A
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware in this step. Do Not wrench tighten until end of
1 . Attach Right Pec Dec Arm
N
(there is a Red dot on this piece) onto the top of
2” x 2” Pec Dec Top L as shown using:
This hardware is pre-installed on 2” x 2” Pec Dec Top L and shown in diagram
with a box around it.
(1)
(1)
Attach (1) End Cap
d3
onto Right Pec Dec Arm
N
as shown .
2 . Attach Right Pec Dec Handle
AB
(there is a Red dot on this piece) onto the
Right Pec Dec Arm N using:
This hardware is pre-installed on Right Pec Dec Arm N and shown in diagram
with a box around it.
(1)
Right Pec Dec Handle
AB
has an arrow on it, the arrow should point up .
Attach (2) Small End Caps d38 onto Right Pec Dec Handle AB as shown .
3 . Attach Left Pec Dec Arm O (there is a Green dot on this piece) onto the top of
Pec Dec Top
L
as shown using:
This hardware is pre-installed on Pec Dec Top L .
(1) 10mm x 16 hex head bolt
(1) 10mm washer
Attach (1) End Cap d3 onto Left Pec Dec Arm O as shown .
4 . Attach 2” x 2” Left Pec Dec Handle
AA
(there is a Green dot on this piece) onto the
Left Pec Dec Arm O using:
This hardware is pre-installed on Left Pec Dec Arm O .
(1) 1/2” nylon lock nut
Left Pec Dec Handle
AA
has an arrow on it, the arrow should point up .
Attach (2) Small End Caps d38 onto Left Pec Dec Handle AA as shown .
NOTE: At this point you should now wrench tighten all bolts and nuts on this step.
M10 x 16mm hex head bolt
M10 washer
1/2” nylon lock nut
STEP
4A