manualshive.com logo in svg

Body Solid EXM2500, Инструкция по сборке и руководство пользователя

Поделиться
Скачать
Body Solid EXM2500 Скачать руководство пользователя страница 3

3

Thank you for purchasing the EXM2500 . This gym is part of the Body-Solid line of quality strength
training machines, which let you target specific muscle groups to achieve better muscle tone and overall 
body conditioning .

Unpacking the Equipment

The EXM2500 is carefully tested and inspected
before shipment. Body-Solid ships the unit in pieces 
that require assembly. Ask for assistance during the 
assembly process.

Carefully unpack the boxes and lay the pieces on the 
floor near the area where you plan to use the 
equipment.

Required Tools:

The tools that you must obtain before 
assembling the EXM2500 include:

 

Set of Allen Keys

 

Socket & Ratchet Set

 

Adjustable Wrenches  

 

Installation Requirements

Be careful to assemble components in the sequence 
presented in this guide. Follow these installation
requirements when assembling the EXM2500:

• 

Set up the EXM2500 on a solid, flat surface. A

 

smooth, flat surface under the machine helps keep  

 

it level. A level machine has fewer malfunctions.

• 

Provide ample space around the machine. Open  

 

space around the machine allows for easier access.

• 

Insert all bolts in the same direction. For aesthetic 

 

purposes, insert all bolts in the same direction    

 

unless specified (in text or illustrations) to do    

 otherwise.
• 

Leave room for adjustments. Tighten fasteners   

 

such as bolts, nuts, and screws so the unit is 

 

stable, but leave room for adjustments. Do not fully  

 

tighten fasteners until instructed in the assembly  

 

steps to do so.

•  Fill out and mail warranty card.

CAUTION: Obtain assistance! Do not 
attempt to assemble the EXM2500 by 
yourself. 

Be careful to assemble all components in 
the sequence presented in this guide. If you 
do not assemble and use the EXM2500 
according to these guidelines, you could 
void the Body-Solid warranty.

The EXM2500 gym comes in three boxes. The weight 
stack plates ship in separate boxes depending on your 
weight stack option.

If any items are missing, contact the dealer from 
whom you purchased the unit or call 

1-800-556-3113

 

for Body-Solid customer service.

To locate your Serial Number see page 4.

Before You Begin

Содержание EXM2500

























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды