body Power PBC5380, Руководство пользователя

Страница: 8 / 16

PBC5380 Page 7
Assembly STEP 3
A. Align Rear Cross Frame (Upper)
(#04)
to two Rear
Upright Frames
(#20)
. Attach them together on each
side (left and right) using one Hex Bolt
(#23)
through
one Large Washer
(#25)
.
B. Align Front Cross Frame (Upper)
(#05)
to two Front
Upright Frames
(#17)
. Attach them together on each
side (left and right) using one Hex Bolt
(#23)
through
one large Washer
(#25)
, then with four Hex Bolts
(#22)
secured by four Nylon Nuts
(#26)
from the
front.
C. On the left side, align one Cross Frame (Upper)
(#12)
to Rear Upright Frame
(#20)
and Front Upright
Frame
(#17)
. Attach them together by using two Hex
Bolts
(#22)
secured by two Nylon Nuts
(#26)
D. Repeat Step C. on the right side.
Hardware Required
NOTE:
To avoid misalignment due to over-tightening,
please do not use a wrench at this time.
Hand-tightening for now will help ensure easy
assembly.
Wrench-tightening should be performed after all
parts are assembled to ensure all nuts, bolts, and
parts are tightly secured before use.
B
D
C
A
#26
Nylon Nut (M10)
[8 Pieces]
#23
Hex Bolt (M10x95 mm)
[4 Pieces]
#25
Large Washer (M10)
[4 Pieces]
#22
Hex Bolt (M10x70 mm)
[8 Pieces]
LEFT
RIGHT