Memory
When the unit is switched off it will remember
its previous settings. These will be restored
when the unit is next switched on.
Factory Default
The unit initially powers up in Constant Mode
and when the batteries are replaced.
Automatic Power Off
The unit will switch off automatically if the
intensity on both channels is at zero and the
unit has not been used for approximately
5 minutes.
Load Detector
When there is no contact between the device
and human skin, it is only possible to increase
the intensity output to level 2. Should this
happen, the flashing electrode icon will
appear on the LCD display.
Low Battery Detection
When the batteries fall below 2.2v 0.2v a
flashing battery icon will appear on the
display.
Additional features of the Profile EMS
7
Profile EMS Instructions 18/5/06 10:19 Page 8
