1.
Turn on your Profile EMS by means of the
ON/OFF button. The unit starts in the
Constant Mode initially.
2.
Choose the mode you wish to use by
pressing the mode button until the mode
you require shows on the LCD screen.
Details of the functions of each mode are
set out later in this booklet.
3.
Slowly increase the intensity using the
intensity controls. See diagram on
page 4.
4.
If you stimulate for a number of hours, it
is advisable to check that your electrodes
have not become too dry as this could
cause minor skin irritation. If this
happens, dampen them slightly.
5.
When you have finished stimulating, turn
off the unit by means of the ON/OFF
button.
6.
Ensure that the unit is switched off before
removing the leads. Do not pull the
leadwires. Remove leads by holding the
jack plugs between the forefinger and
thumb.
Instructions For Use
9
Profile EMS Instructions 18/5/06 10:19 Page 10
