15
Maintenance and Care
•
Change the batteries regularly.
•
The unit must be switched off when
changing the batteries.
•
The unit and lead wires may be wiped
clean by using a very slightly dampened
cloth. Mild soap may be used but DO
NOT apply solvents.
•
Never immerse the stimulator in water.
General Precautions
•
Do not yank or twist the leadwires. Treat
them gently for long life. They are made
from fine wire to be flexible and
lightweight.
•
Do not place your Body Clock Profile EMS
close to any source of excess heat.
•
Do not operate your unit in the presence
of flammable gases.
•
Do not attempt to open the Body Clock
Profile EMS unit.
•
Do not use battery or power sources
other than those specified.
•
Do not drop this unit onto a hard surface.
Checking System Performance
•
If your unit does not appear to be
operating properly, try changing the
battery. Replacing the battery can
eliminate most problems.
•
Check that the leadwires are properly
connected to the unit.
•
Check the electrodes are firmly attached
to the leadwire pins.
•
Make sure that the leadwires are not
damaged or broken.
Profile EMS Instructions 18/5/06 10:19 Page 16
