Body Charger GT8600RF, Руководство пользователя

Страница: 15 / 32

ASSEMBLE INSTRUCTION
2.1 first plug in the Power Cord, Switch on the power, place the Safety Key on the console and click it to the user as well,
turn on the machines, but do not step on the belt this moment. Press the Quick Start Key speed up to 7.0 KM/H, or 4.5 M/H
speed and then reduce the speed 4.0 KM/H or 2.5M/H, walking on the Treadmill, tightly hold the handrails and apply force with
feet on the Running Belt near the Motor Cover against the Running Belt direction, if the belt slips, remove the Safety Key or press
the Emergency Key to stop the treadmill. Use the Hex Key Wrench to turn the tensioning bolts a half-turn clock-wise for each side.
2.2 Do it again as instructions 2.1until the Running Belt is no longer slips. Be sure Do Not over turning a half-turn each side when
adjusting the belt tensions bolts. See following the instructions for reference.
2.3 After that check Running Belt again, see instruction 1 to ensure the proper tracking of the Running Belt in center.
1. Checking the running belt in centering, first plug in the Power Cord,
Switch on the power, place the Safety Key on the console and click it to the user as well,
turn on the machines, but do not step on the belt this moment.
Press the Quick Start Key speed up to 7.0 KM/H, or 4.5 KM/H speed.
2. Tension of Belt has to be inspected before exercising.
(A) If the running belt moves to the right, using the Hex Key Wrench to turn the right adjuster cap a half-turn clockwise,
and then turn the left adjuster cap a half-turn counter- clockwise see the showing in order to set the running belt back to the center.
(B) If the running belt moves to the left, using the Hex Key Wrench to turn the left adjuster cap a half-turn clockwise, and then turn
the right adjuster cap a half-turn counter- clockwise see the showing in order to set the running belt back to the center.
(A)
(B)
Adjust running belt to the left Adjust running belt to the right
14