Body Charger GT8600RF, Руководство пользователя

Страница: 24 / 32

MAINTENANCE AND TECHNICAL DATA
ON/OFF Switch
Safety Key/Emergency stop
Insufficient Power Source
Damaged Line Cord
Line cord improperly plugged in socket
Tripped Circuit Breaker
Insufficient Power Source
Damaged Ground Pin on the line cord
Emergency Stop Button not fitted properly
Safety Key not fitted properly
Any obstructions interfere the Emergency
Stop Button or Safety Key
Emergency Stop Button not work well,
Push down hardly or come back slowly
when it being pressed.
Emergency Stop Button and Safety Key
sensor cord not properly contact
Nipped the Control Message Wire
Ground Pin being removed
Turn the Switch in the ON position.
Place the Safety Key in the proper position, turn right to release.
Using the voltmeter, verify power at outlet. If no power exists, reset circuit breaker at panel.
Replace line cord. Contact the Service Technician Services or replaced by the
Qualified Technician.
Check power connection at wall outlet and treadmill connected properly.
Checking that Circuit Breaker whether is open or not. If open, reset Circuit Breaker.
The Circuit Breaker is located near the Switch I/O. The Circuit Breaker is a round black button.
It is always popped out when open. Press the black button to reset the circuit breaker.
Plug Treadmill into a dedicated Proper Amp circuit. Refer to the Operations Manual.
Using the voltmeter, verify power at outlet. If no power exists, reset circuit breaker at panel.
Check power connection at wall outlet and treadmill connected properly. Do Not remove the
Ground Pin from the plug.
Re-fit the Emergency Stop Button.
Place the Safety Key in the proper position.
Remove the obstructions on the console and handlebar such as towels…etc.
Contact the Technician Services or replaced by the Qualified Technician.
Contact the Technician Services or replaced by the Qualified Technician.
Contact the Technician Services or replaced by the Qualified Technician.
Contact the Technician Services or replaced by the Qualified Technician.
No Power
Treadmill resets
randomly itself or
pauses
3. TROUBLE SHOOTING FOR THE TREADMILL
Malfunction Problem Probable Cause Countermeasure
23