Body Charger GT8600RF, Руководство пользователя

Страница: 9 / 32

ASSEMBLE INSTRUCTION
Please read all instructions carefully before beginning assembly.
Place the shipping carton in a clean area.
Tear down the side of the carton and remove all packing materials.
Do not dispose of the packing material until assembly is completed.
To take out the motor side cover (24) as drawing
by release the bolt (51) from the main base.
To inset the Upright Poles (15)(16) to the main base,
screw it tight by use the Hexagon Head Bolt
(49)(50) with FlatWasher (50).
Make sure the Middle Sensor Cable Wire (77) is inside the Upright Poles
properly and make sure it can connect with the Lower Sensor CableWire
(75) when the Upright Poles has been screw tightly.
Step 1
Assembling the Upright Poles
51
51
24
24
ASSEMBLE INSTRUCTION
Please read all instructions carefully before beginning assembly.
Place the shipping carton in a clean area.
Tear down the side of the carton and remove all packing materials.
Do not dispose of the packing material until assembly is completed.
To take out the motor side cover (24) as drawing
by release the bolt (51) from the main base.
To inset the Upright Poles (15)(16) to the main base,
screw it tight by use the Hexagon Head Bolt
(49)(50) with FlatWasher (50).
Make sure the Middle Sensor Cable Wire (77) is inside the Upright Poles
properly and make sure it can connect with the Lower Sensor CableWire
(75) when the Upright Poles has been screw tightly.
Step 1
Assembling the Upright Poles
51
51
24
24
35
35
8
!
WARNING
Wire Pinch Point