Body Champ TRIO-TRAINER BRT7200, Руководство пользователя

Страница: 21 / 32

BRT7989/7200 Page 20
Computer Operation
5. PULSE RECOVERY:
● First test your current heart rate and show your heart rate value, press this button to enter into pulse recovery testing.
● When you are in pulse recovery mode, press this button to exit.
6. RESET (IF HAVE)
● When in setting, press RESET to reset the value that you would like to preset.
● During any mode, hold down this button for 2 seconds to totally reset the computer.
1. Turn on the computer
Plug in one end of the adaptor to the AC electrical source and connect the other end to the computer. The computer will beep and
enter into initial mode.(See fig 24)
2. Program select and value setting
● Manual Program and Preset Program P1 - P10
A. Press(or rotate) UP, DOWN button to select the program that you like. (See fig 25)
B. Press ENTER button to confirm the selected program and enter time setting window.
C. The time will flash, and then press(or rotate) UP, DOWN button to set up your desired time.
Press ENTER to confirm the value. (See fig 26)
D. The distance will flash, and then press(or rotate) UP, DOWN button to set up the desired distance value.
Press ENTER to confirm the value. (See fig 27)
E. The calories will flash, and then press(or rotate) UP, DOWN to set up the desired calories to be burnt.
Press ENTER to confirm the value. (See fig 28)
NOTE:
1. To press or rotate of UP, DOWN button should be followed by different model.
2. It is suggested to cover your finger within the marked region to select functions in case
of any wrong action.
Operation
DIST. KM RPM KM/H
LEVEL START STOP
PULSE
%
YEAR cm in Kg lb
TIME BMR CAL BMI WATT BODY
fig 24
fig 25
fig 27
fig 26
fig 28
DIST.
LEVEL ST OP
TIME CAL WATT M M/H DIST.
LEVEL ST OP
TIME C AL WATT M M/H
DIST.
LEVEL
ST OP
TIME CAL WATT M M/H DIST.
LEVEL
ST OP
TIME CAL WATT M M/H