3.4
Trimpot Adjustments
• Minimum Speed (MIN) –
Sets the minimum speed of the motor. See Sec. 13.1, on pg. 39.
• Maximum Speed (MAX) –
Sets the maximum speed of the motor. See Sec. 13.2, on pg. 39.
• Acceleration (ACC) –
Sets the amount of time for the motor to accelerate from zero speed
to full speed. See Section 13.3, on page 39.
• Deceleration (DEC/B) –
Sets the amount of time for the motor to decelerate from full
speed to zero speed. See Section 13.4, on pages 39 and 40.
• Slip Compensation (COMP) –
Maintains set motor speed under varying loads. See
Section 13.5, on pages 40 and 41.
• Boost (DEC/B) –
In 50 Hz mode, the trimpot automatically becomes Adjustable Boost,
which can be used to set the Volts/Hz Curve for 50 Hz motors to obtain maximum perform-
ance. In 50 Hz Mode, the deceleration time is automatically set to the same as the accelera-
tion time. See Section 13.6, on pages 41 and 42.
• Current Limit (CL) –
Sets the current limit (overload) which limits the maximum current
(torque) to the motor. See Section 13.7, on pages 42 and 43.
13
