Notes: 1.
Optional software is required for PSC motors — contact our Sales Department.
2.
UL
approved as an electronic overload protector for motors.
4.
In 50 Hz Mode, the DEC/B Trimpot
automatically becomes Adjustable Boost.
3.1
Standard Features
• Simple to Operate –
Does not require programming. Uses trimpots and jumpers, which
are factory set for most applications.
• Diagnostic LEDs –
Power on (PWR) and drive status (ST). See Sec. 12, on pgs. 37 & 38.
• Jumper Selection of Drive Output Frequency –
Increases the motor speed up to two
times the rated RPM. See Section 6.2, on pages 25 and 26.
• Industry Standard Mounting.
See Section 7, on pages 27 and 28.
• Finger-Safe Cover –
Meets IP-20 standard. See Section 5, on pages 22 and 23.
Note:
GFCI Operation – This control can operate with GFCIs (optional software required).
3.2
Performance Features
• Power Start™ –
Provides more than 200% starting torque which ensures startup of high
frictional loads.
• Slip Compensation with Static Auto-Tune and Boost –
Provides excellent load
regulation over a wide speed range.
•
Speed Range –
60:1
3.3
Protection Features
• Motor Overload (I2t) with RMS Current Limit –
Provides motor overload protection which
prevents motor burnout and eliminates nuisance trips. UL approved as an electronic overload
protector for motors. See Section 4.2, on pg. 22, and Section 13.7, on pgs. 42 & 43.
• Electronic Inrush Current Limit (EICL™) –
Eliminates harmful inrush AC line current
during startup.
11
