11
Connection for D1D2 distribution :
D1 D2 uses the relays of circuits 1 and 2
Circuits must be protected by fuse disconnector or circuit breaker 4A
maximum. Indicate on the label above the terminal block the location of
these protections.
Connecting a Melodys :
The Melodys can be connected directly to a relay output of the Sigma, an
option card or a wireless relay.
See page 39 or 40 to assign the relay to the Melodys, and page 25 for
programming.
L
N
N
D1 D2
To Bodet
D1D2
movement.
Make a shunt between
terminals 1 and 3, 0.75² <
cross section of wires <1.5².
Power supply depending on
the model (24V or 240V))
Power supply
depending on the
model (24V or 240V)
Power supply
depending on the
model (24V or 240V)
Terminal of
the Melodys
Terminal of
the Melodys
Terminal of
the Melodys
Connection to the
electronic card of the
Sigma
Connection to an
option card of the
Sigma
Connection to a
wireless relay controlled
by the Sigma
Содержание Sigma Mod
Страница 4: ...4 SIGMA M Installation and start up instructions...
Страница 65: ...65...