9
[Sel] push button (inside Chronoled only)
- To call the main menu (chro/time/scor/prog/test) hold down this push-button.
- To exit a menu, hold down this push-button.
- Press briefly on this push-button to validate the menu or the parameter
previously selected.
[+] push button (inside Chronoled only)
- While displaying a menu, press this button to select the next menu or
parameter.
[S] Remote control key
- While displaying a menu, press this key briefly to validate the menu or the
parameter previously selected.
– In timing mode, press this key to start the timer, and press this key again
stop the timer.
[R] Remote control key
- Selects the next menu or next parameter.
- In timing mode, resets the timer when it is stopped.
[M] Remote control key
- Hold down this key to call the main menu (chrono / time / scor / prog / test).
- Press this key briefly to exit a programming menu.
S : ‘S’ key
+ : ‘R’ key
M : menu key
T : version / Test key
HF remote control
Sel
+
Programming push-buttons
IV - Parameter Setting
To set the parameters of the Chronoled, use the 2 push-buttons located inside
the Chronoled or the HF remote control. The push-buttons are accessible by
removing the right side of the Chronoled.
Caution: to prevent short circuits, do not insert any metallic objects in the Chronoled.
