Boca BEN400I2, Руководство по установке

Страница: 20 / 40

20
Boca’s Family of Ethernet Products
The BOCALANcard is compatible with an NE2000-type Boot
ROM. Refer to the documentation provided with your boot ROM
for configuration instructions. Do NOT enable this option unless
there is a boot ROM present. The default setting is NO BOOT
ROM.
PNP OR JUMPERLESS MODE
This selects the operating mode of the BOCALANcard 2000 Plus:
PNP (Plug and Play) or Jumperless (configured by BENCFG.EXE).
1. If either your BIOS is Plug and Play, or you have Windows 95,
do not install the BOCALANcard Configuration Utility. Leave
the card in the default Plug and Play mode.
2. If you neither have Windows 95, nor is your BIOS Plug and
Play , then you must install the BOCALANcard Configuration
Utility. Run BENCFG and set the mode to “jumperless”. Press
F10
to save changes made in BENCFG.
Notes on Using the BOCALANcard 2000 Plus in Plug and
Play Mode without Using a Plug and Play Operating
System
It is possible to use the BOCALANcard 2000 Plus in Plug and Play
mode without using a Plug and Play operating system. Your
operating system vendor may provide software utilities to do so.
For example, Intel Corp. provides the “ISA Plug and Play Kit” for
MS-DOS type computers. These utilities configure the
BOCALANcard when in Plug and Play mode. The BENCFG
program can report how the utility configured the card (I/O
Address, IRQ) so that you can set up your operating system
accordingly.