BMW X1 - PRODUCT CATALOGUE, Руководство пользователя

Страница: 179 / 314

The indicator light in the instrument clus‐
ter lights up.
To switch distance control back on, press button
again briefly.
After changing over distance control, a Check
Control message is displayed.
Displays in the instrument
cluster
Desired speed and stored speed
▷ Marking lights up green: sys‐
tem is active, the marking indi‐
cates the desired speed.
▷ Marking lights up orange: sys‐
tem is interrupted, the marking
indicates the stored speed.
▷ The marking does not light up: the system is
switched off.
Brief status display
Selected desired speed.
If no speed is indicated, it is possible that the
conditions necessary for operation are not cur‐
rently fulfilled.
Distance to vehicle ahead of you
Selected distance to the vehicle ahead of you is
shown.
Distance display
Distance 1
Distance 2
Distance display
Distance 3
Distance 4
This value is set automatically after the
system is switched on.
Detected vehicle
Symbol lights up orange:
A vehicle has been detected ahead of
you.
Rolling bars: the detected vehicle has
driven away.
ACC does not accelerate. To accelerate, activate
ACC by briefly stepping on the accelerator pedal
or pressing the RES CNCL button or the rocker
switch.
Indicator/warning lights
Symbol flashes orange:
The conditions are not adequate for the
system to work.
The system was deactivated but applies the
brakes until you actively resume control by
pressing on the brake pedal or accelerator pedal.
Symbol flashes red and a signal sounds:
You are prompted to intervene by brak‐
ing or making an evasive maneuver.
The system has been interrupted or dis‐
tance control is temporarily suppressed
because the accelerator pedal is being
pressed; a vehicle was not detected.
Distance control is temporarily sup‐
pressed because the accelerator pedal is
being pressed; a vehicle was detected.
Seite 179
Driving comfort
CONTROLS
179
Online Edition for Part no. 01402896498 - X/18