BMW X1 - PRODUCT CATALOGUE, Руководство пользователя

Страница: 120 / 314

back. The selector lever automatically returns to
the center position when released.
Selector lever position P is engaged automati‐
cally, refer to page
120 , in certain situations.
Selector lever positions
Drive mode D
Selector lever position for normal vehicle opera‐
tion. All gears for forward travel are activated au‐
tomatically.
Reverse R
Engage selector lever position R only when the
vehicle is stationary.
Neutral N
The vehicle may be pushed or roll without power,
for instance in vehicle washes, refer to
page
122 , in selector lever position N.
Parking position P
General information
Selector lever position, for instance for parking
the vehicle.
The transmission blocks the drive wheels in se‐
lector lever position P.
Engage selector lever position P only when the
vehicle is stationary.
Before exiting the vehicle, make sure that selec‐
tor lever position P is set. Otherwise, the vehicle
may begin to move.
Automatic parking position for a
transmission with a tap-operated selector
lever
Selector lever position P is engaged automati‐
cally in situations such as the following:
▷ After the engine is switched off when the ve‐
hicle is in the radio-ready state, refer to
page
105 , or when the ignition is switched
off, refer to page 105 , while selector lever po‐
sition R, D or M/S is engaged.
▷ If the driver's safety belt is unbuckled, the
driver's door is opened, and the brake pedal
is not pressed while the vehicle is stationary
and selector lever position D, M/S or R is en‐
gaged.
▷ After the ignition has been switched off while
selector lever position N is engaged.
Engaging selector lever
positions: with a latching
selector lever
General information
To prevent the vehicle from creeping after you
select a drive mode, maintain pressure on the
brake pedal until you are ready to start.
Functional requirements
The selector lever can only be taken out of se‐
lector lever position P if the ignition is on or the
engine is running.
Engaging selector lever position D,
N, R, or P
With the vehicle stationary, depress the brake
pedal before shifting out of selector lever posi‐
tion P or N; otherwise, the shift block will not be
deactivated and the shift command will not be
executed.
A selector lever lock prevents the following faulty
operation:
▷ Unintentional shifting into selector lever posi‐
tion P or R.
Seite 120
CONTROLS
Driving
120
Online Edition for Part no. 01402896498 - X/18