BMW X1 - PRODUCT CATALOGUE, Руководство пользователя

Страница: 274 / 314

Replacing the rear wiper blade
1. Lift the wiper up fully and pull off the wiper
blade, arrow.
2. Position the new wiper blade and press it on
until it you hear it snap into place.
3. Fold the wipers in.
Light and bulb replacement
General information
Lights and bulbs
Lights and bulbs make an essential contribution
to vehicle safety.
The vehicle manufacturer recommends that you
have the relevant work carried out a dealer’s
service center or another qualified service center
or repair shop.
A spare light box is available from a dealer’s serv‐
ice center or another qualified service center or
repair shop.
Follow the safety information, refer to page
274 .
Light-emitting diodes (LEDs)
Some items of equipment use light-emitting di‐
odes installed behind a cover as a light source.
These light-emitting diodes are related to con‐
ventional lasers and are officially designated as
Class 1 light-emitting diodes.
Follow the safety information, refer to page
274 .
Safety information
Lights and bulbs
WARNING
Bulbs can get hot during operation. Contact
with the bulbs can cause burns. There is a risk
of injury. Only change bulbs after they have
cooled off.
WARNING
Work on switched-on lighting systems can
cause short circuits. There is a risk of injury or
risk of damage to property. When working on
the lighting system, switch off the lights in
question. If necessary, heed the bulb manufac‐
turer's instructions.
NOTICE
Dirty bulbs have a reduced service life. There is
a risk of damage to property. Do not hold new
bulbs with your bare hands. Use a clean cloth
or something similar, or hold the bulb by its
base.
Light-emitting diodes (LEDs)
WARNING
Intensive brightness can irritate or damage the
retina of the eye. There is a risk of injury. Do not
look directly into the headlights or other light
sources. Do not remove the LED covers.
Headlight glass
Condensation can form on the inside of the
headlight glass in cool or humid weather. When
driving with the lights switched on, the conden‐
sation evaporates after a short time. The head‐
light glass does not need to be changed.
Seite 274
MOBILITY
Replacing components
274
Online Edition for Part no. 01402896498 - X/18