BMW i4 GRAN COUPE 2022, Руководство пользователя

Страница: 289 / 368

4. "Charging mode"
5. "Charging in time slot"
6. Select the desired setting.
Charge target
Principle
A target value in percent can be set for charg-
ing the high-voltage battery.
When a lower target value is set, the charging
time may be shortened.
General information
The charging with a set charging target is es-
pecially suitable for charging at DC charging
stations.
A target value of 80 % is recommended for
optimal use of the function.
Target values below 20 % cannot be set.
Set charge target
1. "MENU"
2. "Vehicle apps"
3. "Charging"
4. "Charging target"
5. Select the desired setting.
Permissible volume DC charging
When the vehicle is charged at a DC charging
station, the noise emission during the charging
process can be limited, for instance to comply
with the local noise level restrictions. A limita-
tion of the noise emission can lead to longer
charging times.
1. "MENU"
2. "Vehicle apps"
3. "Charging"
4. "Fan loudness"
5. Select the desired setting.
Stopping the charging process
The charging process can be stopped at any
time by removing the charging cable and con-
tinued at a later time by connecting the charg-
ing cable. For example, this enables other con-
sumers to use the electrical connection in the
meantime or prevents simultaneous high
power draws from multiple consumers.
Additional information:
Detach, refer to page
286 .
Continuing the charging process
If the charging process is interrupted, for in-
stance due to a temporary power failure, the
charging process will continue automatically
after the interruption.
When the vehicle is charged at a public charg-
ing station, the charging process may not con-
tinue automatically after an interruption.
End charging process
1. Remove the charging cable from the vehi-
cle.
Detach, refer to page
286 .
2. Stow the charging cable as required.
3. Press the charging socket cover closed until
it engages.
4. Lock vehicle if it is unlocked.
Goodbye screen on control display
When drive readiness is switched off, a good-
bye screen is displayed on the control display,
in which, among other things, some settings
can be applied for charging via iDrive.
Displays in the instrument
cluster
The charge state indicator light shows the
charge state of the high-voltage battery in the
instrument cluster, if standby state is switched
Seite 289
Charging the vehicle MOBILITY
289
Online Edition for Part no. 01405A546C7 - II/22