BMW i4 GRAN COUPE 2022, Руководство пользователя

Страница: 283 / 368

Charging from the power
grid
The high-voltage battery serves as energy
storage. The high-voltage battery can be
charged utilizing energy recovery during the
trip or via the power grid.
In order to operate the high-voltage battery
optimally, charge the vehicle regularly using a
compatible charger.
When charging via the power grid, you can
chose between the following variants:
▷ Domestic socket outlet.
▷ Industrial socket.
▷ AC charging station.
▷ DC charging station.
For optimal use of the energy from the power
grid, charging at a charging station, e.g., at a
BMW Wallbox, is recommended.
The power grid and charging station should
enable a charging capacity of at least 11 kW.
A lower charging capacity will extend the
charging time.
Ensure that the charging station is installed ac-
cording to the technical requirements of the
power grid, e.g. by a qualified electrician.
Charge current
General information
The charge current strength is indicated in am-
peres.
The vehicle cannot automatically detect the
maximum permissible charge current strength
of the power grid during charging via a domes-
tic socket outlet.
Safety information
Warning
If the charge current strength is adjusted in-
correctly, the power mains of the domestic
socket outlet can be overloaded and over-
heat. There is a risk of fire. Adjust the charge
current strength to the power mains prior to
charging on domestic socket outlets. With un-
known power networks, set on the lowest
level.
Charging on a domestic socket
outlet
The permitted charge current strength must be
determined, for instance by a qualified electri-
cian, before first charging with your own do-
mestic socket outlet or when charging with
third-party domestic socket outlets.
Current limit
General information
The current limit for charging with the Mode 2
charging cable and the Mode 3 charging cable
can be set via iDrive.
Depending on the electrical mains, the set
charging current strength may have to be re-
checked. The permitted charge current
strength must be determined, for instance by a
qualified electrician, before charging with a do-
mestic socket outlet.
If the approved charging current strength is un-
known, set the current limit to the lowest level.
Activating/deactivating current limit
1. "MENU"
2. "Vehicle apps"
3. "Charging"
4. "AC limit"
5. "AC limit"
Seite 283
Charging the vehicle MOBILITY
283
Online Edition for Part no. 01405A546C7 - II/22