BMW i4 GRAN COUPE 2022, Руководство пользователя

Страница: 172 / 368

Warning function
The Forward Collision Mitigation warns on dif-
ferent warning levels, depending on the re-
spective hazardous situation.
In the event of a system warning, the driver
must intervene immediately and in accordance
with the situation.
▷ A red icon lights up:
A hazardous situation has been detected.
Increased awareness is required.
▷ A red icon flashes:
There is a risk of collision. Intervene your-
self immediately.
▷ A warning signal sounds:
There is a risk of collision. Intervene your-
self immediately.
▷ Automatic brake intervention:
Depending on the equipment and situation
in case of an imminent danger of collision,
the system can also intervene with an auto-
matic brake intervention and automatically
decelerate the vehicle, if necessary, to a
complete stop.
If a warning is active, the maximum braking
force necessary is used when the brake is ap-
plied. The brake pedal must be applied suffi-
ciently quickly and forcefully.
Automatic brake intervention
In case of a risk of collision, the system can as-
sist with an automatic brake intervention, if
necessary.
When the vehicle is traveling at a low speed,
the vehicle may come to a complete stop.
A brake intervention can be canceled by step-
ping on the accelerator pedal, releasing the
brake pedal or with an active steering move-
ment.
Depending on the equipment and situation,
the brake intervention can occur up to approx.
155 mph/250 km/h.
At speeds above approx. 130 mph/210 km/h,
only a brief brake intervention will occur.
System limits
Safety information
Warning
The system is designed to operate in certain
conditions and circumstances. Due to condi-
tions or other factors, the system may not re-
spond. There may be a risk of accident or risk
of damage to property. Actively intervene as
warranted. Refer to the information in this
Owner’s Manual regarding the scope of the
system’s operation and limitations.
Detection capability
The system's detection capability is limited.
Objects are only considered if they are within
the detection range of the installed sensors
and are detected by the system.
Depending on the vehicle equipment, the area
is monitored by cameras or radar sensors.
Thus, a system response might not come or
might come late.
System limits of the sensors
Additional information:
Sensors of the vehicle, refer to page
39 .
Functional limitations
The system may be limited in the following sit-
uations:
▷ In tight curves.
▷ With limitation of the driving stability control
systems.
▷ Up to 10 seconds after drive readiness is
switched on via the Start/Stop button.
Seite 172
CONTROLS Safety
172
Online Edition for Part no. 01405A546C7 - II/22