BMW 840Ci, Руководство пользователя

Страница: 118 / 161

117
Ov
er
vie
w
Controls
Operation
Maintenance
Dat
a
K
e
yw
ord
Bulbs and lights are crucial safety fea-
tures of your car. Appropriate care and
attention should therefore be taken
when handling these components. If
you are unfamiliar with such tasks, it is
better to entrust them to BMW
Service.
b
Do not touch the glass of new
bulbs with bare fingers. Use a clean
cloth, paper tissue or similar, and hold
the bulb otherwise only by its base.
c
A box containing spare bulbs is avail-
able from BMW Service.
a
Whenever carrying out any work
on the car's electrical system, always
switch off the consumers in question
or disconnect the battery's negative
terminal, otherwise there is a risk of
causing short-circuits.
Observe any instructions supplied by
the bulb manufacturer, to avoid caus-
ing injury or damage when changing
bulbs.
c
Pop-up headlights
Outer: Low beam headlights
Centre: Fog lights
Inner: High-beam headlights
Each has one H 1, 55 Watt bulb.
Take off the painted upper section of
the pop-up headlight:
1 Remove the screw and raise the
upper section slightly.
2 Push the upper section forward
and take it off.
a
When attaching the painted
upper section of the pop-up head-
light, make sure that it is seated cor-
rectly – particularly at the front
mountings – and that the toggle fas-
tener is properly closed by rotating it
through a quarter of a turn.
c
Low beam headlight (1) and fog
light (2)
a
Protective eyewear and gloves
should be worn when handling this
bulb, If the bulbs are damaged, injury
may be caused.
c
1 Pull the flap and take off the cover.
2 Pull off the plug.
3 Release the spring wire clip.
4 Change the bulb.
When attaching the cover again, press
it on uniformly all around.
31
2de087
Bulb changing
Online Edition for Part-No. 01 41 9 790 191 - © 12/98 BMW AG