BMW 840Ci, Руководство пользователя

Страница: 63 / 161

62
Immobiliser
The engine compartment lid, radio
and any attempts to start the engine
are monitored.
The device is activated with a code
number. Starting the engine, removing
the radio or opening the engine com-
partment are then impossible unless
the code number is input incorrectly.
For this reason: always remember the
code number you have chosen!
Activating in ignition key position 1:
Press keys in the order illustrated,
then turn ignition key to position 0 and
remove.
Any code number from "0000" to
"9999" can be input. (The same or a
different code number must be input
each time the device is activated.)
In ignition key position 0 or with the
key removed, the LED will remain on
for up to 36 hours. If the LED flashes
for about 10 seconds, the engine
compartment is not properly closed or
the radio removed.
De-activating in ignition key positions
1 or 2:
The gong signal and the "----CODE"
display call for the driver to input the
chosen code number.
1 Input the code number at the
numerical input keys.
2 Press SET/RES.
If attempts are made to start the
engine without a code input or if the
incorrect code is entered, the gong
will sound and the engine will not
start.
If the code number has been forgot-
ten, proceed as follows:
1 Disconnect the battery, then
reconnect it. The alarm will sound.
2 Turn the ignition key to position 1.
A time display will appear and run
down for 15 minutes.
3 After 15 minutes, the engine can
be started.
If the code number becomes available
again during this 15-minute waiting
period: Press the keys in the order
illustrated.
31
2en1
1
0
On-board computer
Online Edition for Part-No. 01 41 9 790 191 - © 12/98 BMW AG