Concluding work
Connect the battery
Print out the error memory
Conduct a function test
Assemble the car again following the instructions for its dismantling in reverse order
Coding
This system does not require coding.
Function test for the navigation system
Test the following functions with the car at a standstill and the ignition
switched on
- Insert the navigation CD (must be ordered separately using the Electronic Parts
Catalogue (EPC)) into the navigation computer.
- The keys on the control in the monitor console must light up.
- Switch on the parking light – the monitor must switch from day to night colours.
If the system has been completely disconnected from the car’s electrical system you
must expect a starting phase lasting approx. 15 minutes when you reconnect it.
Drive the car outside to ensure contact between the GPS aerial and the satellite.
The navigation system may then require up to 10 minutes until it receives a signal
from the satellite.
Complete a short test drive (approx. 10 minutes) on digitised roads to calibrate the
system automatically.
Confirm the user instructions using the OK key on the remote control.
Change direction several times during the test drive.
- Drive to a cross-roads – the distance indicator on the monitor must react correctly.
- Reverse a short distance – the position indicator on the monitor must display
the direction correctly.
Function
The navigation system function is described in the enclosed supplementary owner’s
manual.
Retrofit/Installation kit No. 65 90 0 151 635 (others see cover sheet)
Issue date: 06.2002
Installation instructions No. 01 29 0 028 872
EN/17
13. Concluding work, coding, function test
