Retrofit/Installation kit No. 65 90 0 151 635 (others see cover sheet)
Issue date: 06.2002
Installation instructions No. 01 29 0 028 872
The figure shows the switch centre monitor
console (1) from the rear near the centre
console.
Insert the new switch centre (20) into the switch
centre monitor console (1) and secure it with
combination fillister head screws 3.5x12 mm (18).
Connect the black 4-pin connection plug
X521
on the ASC/DSC switch to the slot (30) for it in
the new switch centre (20).
10. Switch centre adapter cable (only required for cars without a switch centre)
1
30
20
18
18
X521
F 46 1179 B
1
20
D1
D
F 46 1180 B
Connect branch
D1
, black 23-pin connection
plug on the switch centre adapter cable
D
to the
switch centre (20) on the switch centre monitor
console (1).
EN/14
If there is no centre console switch centre in the existing bottom module holder, but
only a single switch (ASC or DSC) a centre console switch centre must be ordered
separately using the Electronic Parts Catalogue (EPC).
1
19
D2
X521
F 46 1181 B
Connect branch
D2,
open cable end,
green/blue/yellow cable on the switch centre
adapter cable
D,
to the green/blue/yellow supply
cable on the black 4-pin connection plug
X521
PIN 1
using a double insulation-piercing
connector (19).
